Download Free Word & PDF Label Printing Templates for Product LP18/100

Label Printing Templates for Product LP18/100

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.


Use the purple links below to download and save a template for your A4 labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels (and Avery labels), so you can print your labels quickly, easily, and – perhaps most importantly – trouble-free!
You can also use any of the Avery codes listed below to access an Avery template that is built into the software you want (or need) to use to design and/or print your labels.

View ALL Templates For Rectangular Labels With Rounded Corners

Product ImageLabel WidthLabel HeightNumber AcrossNumber Down
LP18100
100mm30mm29
Top MarginBottom MarginSide Margin (Left)Side Margin (Right)
13.5mm13.5mm3.75mm3.75mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
30mm102.5mm
 
Printing AssistanceAvery* Codes:Also Known As:
Help & Advice
View All Templates 
J8172*, L7172*SL18, LS30100
 
Word TemplatesWord Templates
(alternative)
PDF TemplatesPDF Templates
(alternative)
PortraitPortraitPDF PortraitPDF Portrait
LandscapeLandscapePDF LandscapePDF Landscape
Text Box PortraitText Box Portrait 
Text Box LandscapeText Box Landscape 
 
Notes About This Template
  • Ring Binder Labels – rectangles with rounded corners
  • Centralized layout
  • Selvedge present
  • Bleed not possible
  • Feed direction not indicated
  • Gaps between labels (horizontal only)

Special Feature: 

  • Freezer Removable Labels

Please note that the side margins for this label size are very narrow and may fall outside the printable area of some standard printers, which will prevent the printing of borders and/or colored backgrounds. If your printer cannot print the full area of these labels, you will need to ensure your design does not use the area that your printer cannot print.

Please note that this label size is sometimes manufactured with a label height that is less than 30 mm. If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may want to try using our alternative templates (these templates are set up with a label height of 29.9 mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller label height.

[If you are working in the landscape the height becomes the width; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using the “alternative” template. If you make your own adjustments, you need to remember to alter the side margins.] 

STA
(Matt White Paper With Permanent Adhesive)
   
 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware) and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2 mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

Our labels are very close in size/layout to the (Avery) code provided (within +/- 1 mm)

Leave A Comment

Please note, comments must be approved before they are published