Download Free Word & PDF Label Printing Templates for Product LP18/63

Label Printing Templates for Product LP18/63

Free Word Templates & PDF Templates For Printing A4 Sheets Of Self Adhesive Labels.


Use the purple links below to download and save a template for your A4 labels; all of our label templates are thoroughly and regularly tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and – perhaps most importantly – trouble-free!
You can also use any of the codes listed below to access a template that is built into the software you want (or need) to use to design and/or print your labels.

View ALL Templates For Rectangular Labels With Rounded Corners

Product Image Label Width Label Height Number Across Number Down

LP1863

63.5mm 46.6mm 3 6
Top Margin Bottom Margin Side Margin (Left) Side Margin (Right)
8.7mm 8.7mm 7.25mm 7.25mm
Vertical Pitch
(top of row 1 to top of row 2)
Horizontal Pitch
(left of column 1 to left of column 2)
46.6mm 66mm
 
Printing Assistance Codes: Also Known As:
Help & Advice
View All Templates
3663*, J8161*, J8361*, L6025*, L7161*, L7161X* LL18, AAS018, LS4663, FS18, L18-6347SE^, LDC6346B^, ULL18X
 
Word Templates (46.6) Word Templates (46.4) PDF Templates (46.6) PDF Templates
(46.4)
Portrait Portrait PDF Portrait PDF Portrait
Landscape Landscape PDF Landscape PDF Landscape
Text Box Portrait Text Box Portrait    
Text Box Landscape Text Box Landscape    
Mirror Portrait Mirror Portrait    
Mirror Landscape Mirror Landscape    
 
Notes About This Template
  • Rectangles with rounded corners
  • Centralized layout
  • Selvedge present
  • Bleed not possible
  • Feed direction not indicated
  • Gaps between labels (horizontal only)

Special Feature: 

  • Matt Transparent Labels

Please note that this label size is commonly made with one of two label heights: 46.6 mm or 46.46 mm. Before selecting your template, please measure the label height to confirm which template you need to use. As Word does not allow measurements of 2 decimal places when working in mm, our templates are set up with label heights of 46.6 mm and 46.4 mm.

If you find that your design is printing out slightly too big or too small for your labels (i.e. the bottom of your printed template finishes just below or above the bottom edge of the last label on the sheet), you may want to try using the alternative template. If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller or larger label height.

[If you are working in the landscape the height becomes the width; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using the alternative template. If you make your own adjustments, you need to remember to alter the side margins.] 

STA
(Matt White Paper With Permanent Adhesive)
DF
(Matt White Paper With Freezer Adhesive)
WW
(Matt White Paper With Permanent Wash Off Adhesive)
REM
(Matt White Paper With Removable Adhesive)
GREM
(Matt White Paper With Super Removable Adhesive)
HT
(Matt White Paper With High Tack Adhesive)
ST
(Matt White Paper With Super Tack Adhesive)
GW
(Gloss White Paper With Permanent Adhesive)
GWPQ
(Gloss White Photo Quality Paper With Permanent Adhesive)
SG
(Semi-Gloss White Paper With Permanent Adhesive)
MPQ
(Matt White Premium Quality Paper With Permanent Adhesive)
OPQ
(Matt White Paper With Permanent Opaque Adhesive) 
C
(Coloured Paper With Permanent Adhesive)
FC
(Fluorescent Coloured Paper With Permanent Adhesive)
REMC
(Coloured Paper With Removable Adhesive)
LG
(Gold Paper With Permanent Adhesive)
LS
(Silver Paper With Permanent Adhesive)
BRK
(Brown Kraft Paper With Permanent Adhesive)
GCP
(Gloss Clear Polyester With Permanent Adhesive)
GTP
(Gloss Transparent Polyester With Permanent Adhesive)
GTR
(Gloss Transparent Polyester With Removable Adhesive)
MTP
(Matt Transparent Polyester With Permanent Adhesive)
GWP
(Gloss White Polyester With Permanent Adhesive)
MWP
(Matt White Polyester With Permanent Adhesive)
MWR
(Matt White Polyester With Removable Adhesive)
SMP
(Silver Matt Metallic Polyester With Permanent Adhesive)
MWPE
(Matt White Polyethylene With Permanent Adhesive)
MWPO
(Matt White Polyolefin With Permanent Adhesive)
SVP
(Silver Matt Metallic Polyester With Permanent “VOID” Adhesive)
TEV
(Tamper Evident Vinyl With Permanent Adhesive)
   
 

Please note that these templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware) and are responsible for making any necessary adjustments to achieve the best possible alignment.

All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2 mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.

Leave A Comment

Please note, comments must be approved before they are published